老妖启动之未加密选股指标公式源码

老妖启动之未加密选股指标公式源码

源码正文：

VR1:=vol/CAPITAL{XG51};
VR2:=VOL/700000000{XG51};
VR3:=IF(VR1=0,VR2,VR1){XG51};
VR4:=1.1*(maX(HIGH,REF(CLOSE,1))/MIN(LOW,REF(CLOSE,1))-1){XG51};
VR5:=2.5*MAX(VR3,VR4){XG51};
VR6:=dma(CLOSE,VR5){XG51};
VR7:=SMA(20*(VR6/REF(VR6,1)-1),2,1){XG51};
VR8:=ema(VR7,2){XG51};
VRA:=0.24{XG51};
VRB:=CLOSE>=REF(CLOSE,1){XG51};
牛:= IF(VR7>VRA AND VR8>=0.005 AND VRB,1,0){XG51};
疯牛:=crOSS(牛,0.5) AND COUNT(牛>0.5,10)=1{XG51};
QB:="kdj.J"-REF("kdJ.J",1)>30 AND C/REF(C,1)>1.043 AND "macd.MacD">0 AND "MACD.DEA">0{XG51};
LS:=C/REF(C,1)>1.048 AND C=H AND BETWEEN(FORCAst(V,4),0.2*FORCAST(V,12),2.1*FORCAST(V,12)){XG51};
LQ:=FILTER(LS,28)*100 AND L>REF(C,1)*0.93{XG51};
XG1:=QB OR LQ AND 疯牛{XG51};
涨幅:=9{XG51};
跨度:=10{XG51};
KBBB1:=C/REF(C,1)>1+0.01*涨幅{XG51};
KCCC2:=EXIST(C/REF(C,1)>1+0.01*涨幅,跨度){XG51};
KBBB3:=C/REF(C,1)>1+0.01*涨幅{XG51};
超资:=IF(KBBB1+KCCC2+KBBB3=3,1,0){XG51};
CC:=(H-C)/(C-O)<0.33{XG51};
DD:=(C/REF(C,1)-1)>=0.0502 AND C>REF(C,1) AND (O-L)/(C-O)>=1.48 AND L<REF(L,1) AND L<REF(L,2){XG51};
EE:=(C/REF(C,1)-1)>=0.08{XG51};
AA:=VOL>REF(VOL,1)*1.9 AND C>REF(C,1) AND C/REF(C,1)-1>=0.049 AND CC{XG51};
BB:=(C/REF(C,1)-1)>=0.0502 AND C>REF(C,1) AND V>REF(V,1) AND VOL>REF(VOL,1)*2.5 AND CC{XG51};
异动选股:=IF(FILTER(AA OR BB OR DD OR EE,34),1,0) AND 超资{XG51};
老妖启动: XG1 OR 异动选股{X-G*5?1-C-N-{};

最终合成MACD之底部结构形成未加密选股指标公式源码

源码正文：

dif:=100*(ema(CLOSE,12)-Ema(CLOSE,26)){XG51};
DEA:=EMA(DIF,9){XG51};
死叉:=crOSS(DEA,DIF){XG51};
N1:=BArslAst(死叉){XG51};
N2:=REF(BARSLAST(死叉),N1+1){XG51};
N3:=REF(BARSLAST(死叉),N2+N1+2){XG51};
CL1:=LLV(C,N1+1){XG51};
DIFL1:=LLV(DIF,N1+1){XG51};
CL2:=REF(CL1,N1+1){XG51};
DIFL2:=REF(DIFL1,N1+1){XG51};
CL3:=REF(CL2,N1+1){XG51};
DIFL3:=REF(DIFL2,N1+1){XG51};
pdiFL2:=IF(DIFL2>0,INTPART(LOG(DIFL2))-1,INTPART(LOG(-DIFL2))-1){XG51};
mdiFL2:=INTPART(DIFL2/POW(10,PDIFL2)){XG51};
PDIFL3:=IF(DIFL3>0,INTPART(LOG(DIFL3))-1,INTPART(LOG(-DIFL3))-1){XG51};
MDIFL3:=INTPART(DIFL3/POW(10,PDIFL3)){XG51};
MDIFB2:=INTPART(DIF/POW(10,PDIFL2)){XG51};
MDIFB3:=INTPART(DIF/POW(10,PDIFL3)){XG51};
直接底背离:=(CL1<CL2 ) AND (MDIFB2>MDIFL2) AND (macd<0 AND REF(MacD,1)<0) AND MDIFB2<=REF(MDIFB2,1){XG51};
隔峰底背离:=(CL1<CL3 AND CL3<CL2 ) AND (MDIFB3>MDIFL3) AND (MACD<0 AND REF(MACD,1)<0) AND MDIFB3<=REF(MDIFB3,1){XG51};
底背离:=((MDIFB2>REF(MDIFB2,1))*REF(直接底背离,1)) OR ((MDIFB3>REF(MDIFB3,1))*REF(隔峰底背离,1)){XG51};
底部结构形成:底背离{X_G=5^1_C_N_{};